Representative configurationAngle Seat & Control Valves
Pneumatic Angle Seat Valve
A pneumatic angle-seat valve uses a piston actuator to move a closing element along an angled valve body.
View Product
Representative configuration. Confirm the appearance and dimensions of the proposed model.
Angle Seat & Control Valves
Pneumatic Diaphragm Control Valve
A pneumatic diaphragm control valve combines a linear valve trim with a diaphragm actuator and a matching positioner.
- Control element
- Linear regulating valve trim
- Actuator
- Pneumatic diaphragm
- Reference arrangement
- Flanged single-seat control valve assembly
- Control package
- Positioner and air preparation selected to requirements
- Sizing information
- Minimum/normal/maximum flow, pressures, temperature and fluid properties
- Performance to specify
- Flow coefficient, characteristic, leakage requirement and fail position
Send your requirements for the proposed configuration.
Product Description
Product construction and operation
A pneumatic diaphragm control valve combines a linear valve trim with a diaphragm actuator and a matching positioner. The positioner adjusts actuator air pressure so the valve follows the control command, while the trim determines the relationship between travel and flow.
Configuration features
- Linear diaphragm drive is paired with a regulating valve body.
- A positioner coordinates command input and valve travel.
- Spring action and valve assembly determine the specified air-loss response.
Selection and installation details
Control-valve sizing requires more than matching the pipe diameter. The proposed trim must provide the required controllable flow range at the available differential pressure. Include potential noise, cavitation, flashing or erosive solids in the review. A spring mechanism does not by itself prove the final assembly is fail-open or fail-closed: valve action, linkage and control arrangement must all be matched.
Review supply pressure at the equipment while it is operating, not only the compressor setting. Select accessories and the loss-of-air response for the complete assembly.
Application fit
Compatible process regulation where a linear control valve and diaphragm actuator suit the duty.
Information to include in your enquiry
Include the medium, normal and maximum pressure and temperature, connection dimensions, required operating time and quantity. For an existing installation, add identification photographs and the current assembly drawing.
Confirm the final assembly drawing, materials, ratings and control documentation for the proposed configuration before ordering. Product photographs show representative configurations.
Browse Angle Seat & Control Valves, use the actuator sizing checklist, or send your application requirements.
Need mounting dimensions? Request the drawing for your proposed configuration.
Specifications
| Control element | Linear regulating valve trim |
|---|---|
| Actuator | Pneumatic diaphragm |
| Reference arrangement | Flanged single-seat control valve assembly |
| Control package | Positioner and air preparation selected to requirements |
| Sizing information | Minimum/normal/maximum flow, pressures, temperature and fluid properties |
| Performance to specify | Flow coefficient, characteristic, leakage requirement and fail position |
Confirm the final ratings and dimensions against the documentation for your selected model.
Product Documentation
Request the current datasheet, dimensional drawing and wiring or air-circuit information for the proposed product or assembly. Include your valve type and supply requirements so the documents match the configuration under discussion.
Related Products
Representative configuration
Representative configurationAngle Seat & Control Valves
Pneumatic T-Pattern Piston Valve
A T-pattern piston-operated valve places the pneumatic actuator above an in-line valve body.
View ProductPRODUCT ENQUIRY
Request a QuoteDiscuss your product configuration.
Include the valve type, operating load, supply and control requirements.